Kiln flue gas desulfurization tower-河北三阳盛业玻璃钢集团有限公司

Kiln flue gas desulfurization tower

Keyword：

kiln the and is ammonium sulfate of in to with

Category：

Fiberglass desulfurization tower

Inquiry：

+86-15103380001

Inquiry

Releate Product

Details

The SCT series fiberglass desulfurization and dust removal towers produced by our company have obtained two national utility model patents. This series of products is a high-tech new product with excellent economic and technical performance. The product mainly uses advanced, high-temperature resistant, and corrosion-resistant resin as composite materials. The main body of the equipment is manufactured using advanced mechanical winding production technology, and the equipment structure adopts modular combination design.
The main material of high-temperature resistant resin and the scientific and exquisite structural design endow the ScCT series desulfurization and dust collector with advantages such as wear resistance, small footprint, multifunctional integration, easy installation, and maintenance. At the same time, it also has technical performance advantages such as low resistance, good dehydration, low water consumption, purification, and desulfurization efficiency, effectively solving many practical problems in the use of wet purification equipment, It is currently the preferred and updated product for coal-fired boilers, oil-fired boilers, coal water slurry boilers, kilns, thermal power plants, cement plants, and exhaust gases in the metallurgical and chemical industries in China.
Process of fiberglass desulfurization equipment: Hot flue gas enters the pre washing tower and comes into contact with saturated ammonium sulfate solution. During this process, the flue gas is cooled, and ammonium sulfate crystals are precipitated due to the evaporation of water in the saturated ammonium sulfate solution. The cooled flue gas enters the SO2 absorption tower through the mist eliminator. In the absorption tower, ammonia is mixed with water to form an ammonia liquid. So2 in the flue gas is absorbed here and reacts with ammonia to produce ammonium sulfate. Finally, the flue gas after desulfurization is discharged into the atmosphere through a chimney with a height of 15-80 meters.
The ammonium sulfate solution is sent to the pre washing tower for recycling, and the ammonium sulfate slurry in the pre washing tower enters the dehydration system. First, it is dehydrated by a hydraulic cyclone, and then the ammonium sulfate filter cake is obtained through a centrifuge. The clear liquid recovered from the cyclone and centrifuge is returned to the pre scrubber for recycling. The ammonium sulfate filter cake is sent to the granulation system to obtain high utilization value granular ammonium sulfate fertilizer, which is stored in a dome storage bin capable of accommodating 50000 tons of ammonium sulfate before being transported by train or truck.

Related Product

FRP septic tank

Septic tank refers to the equipment made of synthetic resin matrix and glass fiber reinforced material, which is specially used to treat domestic sewage. It is mainly applicable to domestic sewage purification treatment equipment for civil buildings such as industrial enterprise living quarters and urban residential quarters. The tank body is made of glass fiber reinforced plastic material by molding or winding process, with high strength and good sealing performance. It will never be broken or damaged due to foundation settlement and the phenomenon of hardened scum layer in the tank will never occur, which completely solves the problem of brick septic tank polluting groundwater.

FRP septic tank

The basic principle of FRP moulded septic tank, wound septic tank and internally reinforced septic tank is to remove and kill parasitic eggs and bacteria, control the breeding of mosquitoes and flies, and achieve the goal of harmless fecal disposal by using the sedimentation of parasitic eggs, which is more important than the feces and urine mixture, and the principle of closed anaerobic fermentation, liquefaction, ammoniation, and biological antagonism.

Glass fiber reinforced plastic power protection tube

Fiberglass cable protection tube, cable threading tube - is a type of pipe formed using unsaturated polyester resin as the matrix, continuous glass fiber and its fabric as the reinforcing material, and computer-controlled winding or extrusion process. The fiberglass cable protection tube is currently used more frequently in line laying, with obvious advantages such as high strength and corrosion resistance, and the inner wall of the cable is smooth and scratch free.

Urban rainwater drainage pipeline

Fiberglass reinforced plastic pipes are lightweight, high-strength, and corrosion-resistant non-metallic pipes. It is made of resin (food grade resin is used for conveying drinking water), glass fiber, quartz sand and special process. It uses resin as the matrix and glass fiber as the winding layer by layer on the rotating core mold according to the process requirements, and evenly lays quartz sand between the fibers as the sand layer. Its pipe wall structure is reasonable and advanced, which can fully utilize the role of materials, improve the rigidity while meeting the requirements of service strength, and ensure the stability and reliability of the product.

Buried sand pipe

GRP buried sand pipe is a new composite material made of resin as the matrix material, glass fiber as the reinforcement material, and quartz sand as the filling material. It has become the best choice for the chemical industry, drainage engineering, and pipeline engineering due to its excellent corrosion resistance, hydraulic characteristics, lightweight and high-strength, large transportation flow, convenient installation, short construction period, and low comprehensive investment.

Fiberglass cover plate

The anti odor cover plate of fiberglass sewage tank is mainly used in sewage treatment system engineering, petrochemical and other industries. Due to the characteristics of corrosion resistance, lightweight and high-strength, aging resistance, designability, easy installation, and long service life of fiberglass, fiberglass cover plates have been widely used in the development of modern society. According to user requirements and the size of the sewage tank, other shapes such as curved cover plates and flat cover plates can be made. Its colors can also be made into various colors according to the needs of users, to meet their different needs.

Get a free product quote

Our staff will contact you within 24 hours (working days), if you need other services, please call the service hotline：+86-15103380001

Submit

Founded in May 2003, its predecessor was Hebei Zaoqiang FRP Group Co., Ltd., which was gradually transformed from a state-owned enterprise...

Hebei SanYang Shengye FRP Group Co., Ltd.

Chairman: Yu Shihe

Marketing Manager: Zheng Hengzhen

Mobile：15103380001
Sales call: 0318-8261888
Website： http://www.hbsysy.cn/
E-mail：sysy1666@163.com
Address of the old factory: No. 189, Fuqiang North Road, Zaoqiang County, Hebei Province
New factory address: No. 1 Kaitai Road, Zaoqiang County, Hebei Province